Watts Premier FILTER-PURE Manuel d'utilisateur télécharger pdf (Page 4)

√ 1 FILTER PURE Unit √ 1 Parts Bag √ 1 Green Tube

√ 2 Filters √ 1 Faucet Assembly √ 1 Blue Tube

If any of the items are missing, please contact Watts Premier prior to installing

Contents of the Filter-Pure System

Operational Parameters

Maximum Minimum

Operational Temperature 100°F (37.8°C) 40°F (4.4°C)

Operating Pressure 85 psi (5.98 kg/cm²) 20 psi (1.406 kg/cm²)

pH Parameters 10 5

Flow Rate 0.5 GPM @ 60 psig

Installation must comply with State and local plumbing regulations. Do not use with water that

is micro biologically unsafe or of unknown quality without adequate disinfection before or after

the system. System is intended to be installed using the cold water supply only.

Tools Recommended For Installation

√ 1/2" Diamond Tipped Hole Saw bit for faucet opening (Porcelain Sinks) or,

√ 1/2" Hole Saw Bit for faucet opening (Most Counter Tops - excluding marble) or,

√ 1/2” Round Knock out Punch for faucet opening (Stainless Sinks)

√ 1 1/4” Adjustable Wrench

√ 1/2" Open End Wrench

√ Adjustable Pliers

√ Sharp Knife

√ 1/8" diamond tip bit, pilot hole

√ Electric Drill

√ Phillips Screw Driver

√ Phillips bit for electric drill

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Watts Premier FILTER-PURE Manuel d'utilisateur Page 4