Watts Premier FILTER-PURE Guide de dépannage télécharger pdf (Page 12)

Page 12

Red Tube Connection (From FAUCET To The RO Module)

Locate the 1/4” RED tube attached to the RO faucet. Insert the end of the

red tube with the 90* bend into the open 1/4” quick connect tting on the

back side of the RO-Pure Head behind the Membrane head making sure

the tube is pushed in all the way to the tube stop. See Diagram Above

Step 14

IMPORTANT:

The Flow Restrictor is installed inside of the red tube at the bent end. DO

NOT REMOVE THE FLOW RESTRICTOR OR CUT THE RED TUBING AS IT

WILL DAMAGE THE FLOW RESTRICTOR.

Blue Tube Connection (From FAUCET To The RO Module)

Locate the 1/4” BLUE tube attached to the RO faucet. Insert the open end of the tube with

the 90* bend into the open 1/4” quick connect tting on the back side of the RO-Pure Head

behind the Post Filter head making sure the tube is pushed in all the way to the tube stop.

See Diagram Above

Step 13

Rear View of RO-Pure System

SEDIMENT

PRE CARBONMEMBRANEPOST CARBON

Mounting Holes

Flow

Restrictor

Insert

Flow Restrictor

Red Tubing to Manifold

(Attached to faucet)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Watts Premier FILTER-PURE Guide de dépannage Page 12